home *** CD-ROM | disk | FTP | other *** search
/ Amiga Tools 5 / Amiga Tools 5.iso / internet-tools / amitcp / amitcp-2.2 / env / sana2 / rhslip0.config < prev   
Encoding:
Text File  |  1993-10-08  |  916 b   |  26 lines

  1. # $Id: rhslip0.config,v 1.1 1993/08/17 00:00:00 rhialto Exp $
  2. #
  3. # This file is the configuration file for the SANA-II SLIP
  4. # driver.  It only contains one config line (aside from
  5. # the comments).  The format of the line (in ReadArgs()
  6. # style) is:
  7. #
  8. # SERNAME/A,SERUNIT/A/N,SERBAUD/A/N,IPSTR/A,CD=CARRIERDETECT/S,7WIRE/S
  9. #
  10. # SERNAME - The name of the serial device to use.
  11. #
  12. # SERUNIT - The unit number for the serial device.
  13. #
  14. # SERBAUD - The baud rate to use with the serial device.
  15. #
  16. # IPSTR      - The IP address of the SLIP Device
  17. #
  18. # CD=CARRIERDETECT - If specified, causes the slip.device to pay attention
  19. #                    to the status of the carrier detect line.  If this isn't
  20. #             specified, slip.device ignores the CD signal.
  21. #
  22. # 7WIRE   - If specified, causes slip.device to use seven wire handshaking
  23. #        with the modem (strongly recommended for high baud rates).
  24. #
  25. serial.device 0 19200 1.1.1.2
  26.